openspec-sync-specs

Sync delta specs from a change to main specs.

This is an agent-driven operation - you will read delta specs and directly edit main specs to apply the changes. This allows intelligent merging (e.g., adding a scenario without copying the entire requirement).

Store selection: If the user names a store (a store is a standalone OpenSpec repo registered on this machine) or the work lives in one, run openspec store list --json to discover registered store ids, then pass --store <id> on the commands that read or write specs and changes (new change, status, instructions, list, show, validate, archive, doctor, context, schemas, view). Once selected, treat --store <id> as sticky for the rest of the workflow. Every unscoped example of those commands below is shorthand: before running it, append the flag. For example, run openspec status --change "<name>" --json --store "<id>", not the unscoped form shown below. Other commands do not take the flag. Hints printed by commands already carry the flag; keep it on follow-ups. Without a store, commands act on the nearest local openspec/ root.

Project check: These steps expect a project that already uses OpenSpec. Before the first step that writes anything (new change, archive, sync specs, or authoring an artifact file), confirm the project has a root: run openspec list --json (with --store <id> when a store is selected, since the store is then the root) and read root. A root object means the project is set up. "root": null means it is not - there is no openspec/ directory here, and a write such as openspec new change would create one as a side effect. The command also exits non-zero, which is that answer rather than a broken CLI, so read the JSON instead of retrying or working around it.

One "root": null is not about setup: when a status error message starts with Declared in or Invalid store declaration in and names this project's openspec/config.yaml (or config.yml), the project does use OpenSpec through a store it declares, which this machine cannot resolve (the store is not registered, or the store: line is malformed). Do not treat it as uninitialized and skip the branches below: stop before writing and show the user that error's message and fix.

Otherwise, with no root, what happens next depends on how this workflow was reached:

• Auto-selected: you chose this workflow yourself, without the user naming OpenSpec, naming this skill, or running its slash command. Stop using OpenSpec and answer the request normally, as you would with no OpenSpec installed. Do not ask them to set anything up and do not mention OpenSpec setup.
• Explicit OpenSpec request: the user named OpenSpec, named this skill, or ran its slash command. Stop before writing and ask how to proceed: set this project up (openspec init), target a store they already have (--store <id>), or continue without OpenSpec for this request. Wait for their answer.

In both branches, never create the root as a side effect: do not run openspec init until the user asks for it, do not hand-create openspec/ files, and do not let a command create it.

<capability-path> is the spec directory relative to specs/ (for example, user-auth or identity/user-auth). Preserve the full path from each delta spec when resolving its main spec.

Input: Optionally specify a change name. If omitted, check if it can be inferred from conversation context. If vague or ambiguous you MUST prompt for available changes.

Steps

1. Select the change

   If a name is provided, use it. Otherwise:

   • Infer from conversation context if the user mentioned a change
   • Auto-select if only one active change exists
   • If ambiguous, run openspec list --json to get available changes and ask the user to select one

   When prompting, show changes that have delta specs (under specs/ directory).

   Always announce: "Using change: " and how to override (e.g., /openspec-sync-specs <other>).

2. Resolve change context

   Run:

   openspec status --change "<name>" --json
   

   The JSON includes planningHome.root. Main specs live under <planningHome.root>/openspec/specs/ — use that (store-aware) root for every main-spec path below, not a hardcoded repo path. When a store is selected it points at the store, not the current repository.

3. Find delta specs

   Use artifactPaths.specs.existingOutputPaths from the status JSON as the only source of delta spec paths. If the specs entry is missing or existingOutputPaths is empty, report that there are no delta specs to sync, do not infer them from other artifacts, and stop without requesting artifact instructions or writing a main spec.

   Sync every path in existingOutputPaths unless the caller narrowed the set. A caller narrows it by naming an explicit list of complete entries from existingOutputPaths — copy those absolute values verbatim. Archive does this inline, and a user can too (for example, by selecting the entry ending in /specs/billing/invoices/spec.md). Then sync only the named paths and leave the remaining delta specs untouched: bulk archive excludes a delta whose implementation it could not find, and syncing it anyway would write a main spec the caller deliberately withheld. Carry that narrowed selection through step 4; never widen it back to the full list. If a named path is not in existingOutputPaths, do not sync it — report it and stop, rather than dropping it silently. If the named list is empty, report that there is nothing to sync and stop without writing a main spec.

   Each delta spec file contains sections like:

   • ## ADDED Requirements - New requirements to add
   • ## MODIFIED Requirements - Changes to existing requirements
   • ## REMOVED Requirements - Requirements to remove
   • ## RENAMED Requirements - Requirements to rename (FROM:/TO: format)

Delta Spec Format Reference

# Spec Delta

## Purpose

Only on a delta that introduces a brand-new capability. Seeds the new main spec.

## ADDED Requirements

### Requirement: New Feature
The system SHALL do something new.

#### Scenario: Basic case
- **WHEN** user does X
- **THEN** system does Y

## MODIFIED Requirements

### Requirement: Existing Feature
The system SHALL keep doing the existing thing, now also handling A.

#### Scenario: Scenario the main spec already has
- **WHEN** user does X
- **THEN** system does Y

#### Scenario: New scenario to add
- **WHEN** user does A
- **THEN** system does B

## REMOVED Requirements

### Requirement: Deprecated Feature

## RENAMED Requirements

- FROM: `### Requirement: Old Name`
- TO: `### Requirement: New Name`

Main Spec Format Reference

Main specs are what the delta merges INTO. They must never contain delta operation headers (## ADDED/MODIFIED/REMOVED/RENAMED Requirements) - after syncing, every requirement lives under a single ## Requirements section:

# <capability> Specification

## Purpose
Short description of what this capability does and why it exists.

## Requirements

### Requirement: New Feature
The system SHALL do something new.

#### Scenario: Basic case
- **WHEN** user does X
- **THEN** system does Y

Key Principle: Intelligent Merging

Unlike programmatic merging, you merge rather than overwrite:

• A MODIFIED block carries the whole requirement - body plus every scenario that survives the change. openspec validate and openspec archive both reject one that drops a scenario the main spec still has.
• Keep anything the delta does not mention, in the main spec's existing order
• Use your judgment to merge changes sensibly

Output On Success

## Specs Synced: <change-name>

Updated main specs:

**<capability-1>**:
- Added requirement: "New Feature"
- Modified requirement: "Existing Feature" (added 1 scenario)

**<capability-2>**:
- Created new spec file
- Added requirement: "Another Feature"

Main specs are now updated. The change remains active - archive when implementation is complete.

Guardrails

• Read both delta and main specs before making changes
• Preserve existing content not mentioned in delta
• Never copy a delta file into a main spec as-is - merge its content so the main spec keeps the Main Spec Format Reference structure, with no delta operation headers
• If something is unclear, ask for clarification
• Show what you're changing as you go
• The operation should be idempotent - running twice should give same result
• Use only artifactPaths.specs.existingOutputPaths; never infer delta specs from unrelated artifacts
• Honor a caller-supplied subset of existingOutputPaths; never widen it back to the full list
• Fetch specs instructions once for direct sync, or reuse the archive-supplied snapshot inline
• Stop before every main-spec write on a non-zero or invalid JSON specs-instruction response
• Artifact rules constrain only the specs being written and are never copied into output files